ラボ用純水システム
The most commonly used solvent in laboratories is water; it is regularly used for cleaning and is the basis for cell cultures, buffers and reagents, making the quality of water critical to the success of experiments. Although tap water may be considered fairly pure there are 5 classes of contaminants that may pose a problem for laboratory tasks. This includes; inorganic ions, organics, particulates/colloids, bacteria and gases. Water grades (Types 1–3) help to define different levels of water quality for technical and economical reasons. This helps the user choose the correct water quality for a specific application. Water quality is determined by the technologies used to remove contaminants. Commonly used purification techniques include; distillation, ion exchange, activated carbon, microporous filters, ultrafiltration, reverse osmosis, elix continuous deionization and ultraviolet (UV) radiation.
技術的パラメータ
タイプ |
ラボ用純水システム |
||
原水基準 |
Tap water: TDS<200 ppm, pressure>0.1Mpa, Temp. 5-45 degree |
||
水質 |
導電率 |
Less than or equal to 0.6μS/cm (25 degree ) |
|
酸化性物質 |
0 .08mg/l以下 |
||
蒸発残留物 |
1mg/l以下 |
||
仕様 |
容量 |
10 L/h – 150L/h |
|
出力フロー |
RO outlet: 1.5 – 1.8 L/min |
||
RO出力水 |
Conductivity Less than or equal to 10μS/cm, PH: 7.3 (25 degree ) |
||
制御システム |
モード |
LCDディスプレイ(電力、水不足と満杯、RO取水、内部リサイクル、膜アラーム、超浄化カラムアラーム、フラッシングなど) |
|
安全性 |
水不足と完全停止保護 |
||
モニター |
RO水質 |
応用分野
タイプ2グレードの水としても知られる高純度水は、多くのアプリケーションや高度な分析手順で広く使用されています。
これも:
1.ラボウェアの最終クリーニング
2.緩衝液、化学試薬調製水
3.微生物培地調製水
4.水素発生器、室内加湿器、オートクレーブ用純水
5.実験動物用飲料水等
6. Supporting biochemical analyzer
タイプ2は、タイプ3の水を必要とするアプリケーションでも使用できます。 これは、アプリケーション中に副産物の生成を回避するのに役立つ非常に一般的な方法です。
インストールガイダンス
当社のサービス
a。完全な技術サポートと機器の設置後を提供します。
b。システムのオペレーターのトレーニングを支援します。 また、詳細な操作マニュアルが用意されています。
テクニカルサポートに関するc.724時間の電話支援。
d。消耗品とスペアパーツを-長期的に原価で提供します。
http://ja.rxdpurewatersystem.com/